REAR NO. 2 SEAT OUTER BELT ASSEMBLY REMOVAL


  1. REMOVE REAR DOOR SCUFF PLATE


    1. A017D4T

      Disengage the 5 claws, 3 clips and guide, and remove the rear door scuff plate LH.

  2. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP

  3. REMOVE DECK BOARD ASSEMBLY


    1. A017CPI

      Remove the deck board assembly.

  4. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY


    1. A017F31

      Disengage the 2 guides and remove the No. 3 deck board sub-assembly.

  5. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY


    1. A017D36

      Disengage the 2 guides and remove the No. 2 deck board sub-assembly.

  6. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Remove the tonneau cover assembly.

  7. REMOVE REAR SEAT SIDE COVER LH


    1. A017BBU

      Disengage the 2 clips and remove the rear seat side cover LH.

  8. REMOVE DECK SIDE TRIM BOX LH


    1. A017BZVE01

      Remove the 2 deck side trim clips and clip.

    2. Remove the deck side trim box LH as shown in the illustration.

      A017G2A

  9. REMOVE REAR SEAT SIDE COVER RH


    1. A017EH1

      Disengage the 2 clips and remove the rear seat side cover RH.

  10. REMOVE JACK CARRIER SUPPORT

  11. REMOVE JACK CARRIER CUSHION (for LHD)


    1. A017ENI

      Remove the jack carrier cushion.

  12. REMOVE JACK CARRIER CUSHION (for RHD)


    1. A017D41

      Remove the jack carrier cushion.

  13. REMOVE JACK ASSEMBLY (for LHD)


    1. A017EKS

      Remove the jack assembly.

  14. REMOVE JACK ASSEMBLY (for RHD)


    1. A017DSX

      Remove the jack assembly.

  15. REMOVE JACK CARRIER ASSEMBLY (for LHD)


    1. A017EAS

      Using a screwdriver, disengage the 3 claws and remove the jack carrier assembly.

  16. REMOVE JACK CARRIER ASSEMBLY (for RHD)


    1. A017D6R

      Using a screwdriver, disengage the 3 claws and remove the jack carrier assembly.

  17. REMOVE DECK SIDE TRIM BOX RH


    1. A017FOPE01

      Remove the 2 deck side trim clips and clip.

    2. Remove the deck side trim box RH as shown in the illustration.

      A017E9B

  18. REMOVE REAR MAT


    1. A017F51

      Remove the rear mat.

  19. REMOVE DECK FLOOR BOARD ASSEMBLY


    1. A017FMA

      Disengage the 3 claws.

    2. Remove the 2 nuts and the deck floor board assembly.

  20. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY


    1. A017GAE

      Remove the bolt and rear No. 2 seat inner belt assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  21. DISCONNECT REAR SEAT LAP TYPE BELT ASSEMBLY LH


    1. A017F2F

      Remove the bolt and disconnect the rear seat lap type belt assembly LH.

  22. DISCONNECT REAR SEAT LAP TYPE BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  23. REMOVE REAR NO. 2 SEAT ASSEMBLY


    1. A017E5S

      Remove the 4 bolts and the rear No. 2 seat assembly.

  24. REMOVE REAR FLOOR FINISH PLATE


    1. A017BSY

      Disengage the 4 clips and the 4 claws, and remove the rear floor finish plate.

  25. REMOVE REAR SEAT SIDE GARNISH CAP (for RH Side without Rear Air Conditioning System)


    1. A017DMI

      Disengage the 8 claws and guide, and remove the rear seat side garnish cap.

  26. REMOVE REAR SEAT SIDE GARNISH CAP (for RH Side with Rear Air Conditioning System)


    1. A017FP0

      Remove the screw.

    2. Disengage the 6 claws and the guide, and remove the rear seat side garnish cap.

  27. REMOVE DECK SIDE TRIM COVER


    1. A017FRQE01

      Using a screwdriver, disengage the 2 claws and remove the deck side trim cover LH.

      Tech Tips

      Tape the screwdriver tip before use.

  28. REMOVE DECK SIDE TRIM


    1. A017F36

      Remove the bolt.

    2. A017B91

      Disengage the 4 claws and the 3 guides, and remove the deck side trim LH as shown in the illustration.

  29. REMOVE SIDE TRIM COVER LH (for LH Side)


    1. A017EO1

      Disengage the 10 claws and remove the side trim cover LH.

  30. REMOVE SIDE TRIM COVER RH (for RH Side without Rear Automatic Air Conditioning System)


    1. A017CSI

      Disengage the 4 claws and remove the side trim cover RH.

  31. REMOVE REAR ROOM TEMPERATURE SENSOR (for RH Side with Rear Automatic Air Conditioning System)


    1. A017B3P

      Disengage the 4 claws and remove the rear room temperature sensor.

    2. Disconnect the connector.

  32. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH (for LH Side)


    1. A017EUZE01

      Using a screwdriver, disengage the 6 claws and 2 guides, and remove the rear combination light service cover LH.

      Tech Tips

      Tape the screwdriver tip before use.

  33. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH (for RH Side)


    1. A017BZ2E01

      Using a screwdriver, disengage the 6 claws and the 2 guides, and remove the rear combination light service cover RH.

      Tech Tips

      Tape the screwdriver tip before use.

  34. REMOVE REAR POWER POINT SOCKET ASSEMBLY (for LH Side)


    1. Disconnect the connector.

    2. A017G8M

      Disengage the claw and remove the rear power point socket assembly.

  35. REMOVE REAR POWER OUTLET SOCKET COVER (for LH Side)


    1. A017B0H

      Disengage the 2 claws and remove the rear power outlet socket cover.

  36. REMOVE REAR DECK TRIM COVER (for LH Side without Remote Folding Function)


    1. A017EYF

      Disengage the 10 claws and remove the rear deck trim cover.

  37. REMOVE RECLINING REMOTE CONTROL LEVER BEZEL LH (for LH Side with Remote Folding Function)


    1. A017FIS

      Disengage the 5 claws and remove the reclining remote control bezel LH.

  38. REMOVE ROPE HOOK ASSEMBLY


    1. A017FLCE01

      for Front Side:


      1. Using a screwdriver, disengage the 2 claws.

        Tech Tips

        Tape the screwdriver tip before use.

      2. Remove the bolt and the rope hook assembly.

    2. A017B9EE01

      for Rear Side:


      1. Using a screwdriver, disengage the 2 claws.

        Tech Tips

        Tape the screwdriver tip before use.

      2. Remove the bolt and rope hook assembly.

  39. REMOVE NO. 2 DECK SIDE TRIM HOOK (for LH Side)


    1. A017CPF

      Remove the screw and the No. 2 deck side trim hook.

  40. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side)

    Tech Tips

    Use the same procedure for the No. 1 luggage compartment trim hook and the No. 2 deck side trim hook.

  41. REMOVE FRONT DECK SIDE TRIM COVER


    1. A017C3ZE01

      Using a screwdriver, disengage the 4 claws and remove the 2 front deck side trim covers LH.

      Tech Tips

      Tape the screwdriver tip before use.

  42. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)


    1. Remove the 2 bolts.

    2. Remove the 2 clips.

    3. Disengage the 7 claws and 4 clips, and remove the deck trim side panel assembly LH.

      A017FE0

  43. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)


    1. Remove the 3 bolts.

    2. Remove the 2 clips.

    3. Disengage the 7 claws and 4 clips, and remove the deck trim side panel assembly RH.

      A017FTC

  44. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY (w/o Power Back Door)


    1. w/o Rear No. 2 Seat:


      1. A017ES0

        Remove the bolt.

      2. Disengage the 5 clips and 2 guides, and remove the roof side inner garnish assembly LH.

    2. w/ Rear No. 2 Seat:


      1. A017DAD

        Disengage the 2 claws and 2 guides, and remove the rear No. 2 seat outer belt guide.

      2. A017FTJ

        Remove the bolt.

      3. Disengage the 5 clips and 2 guides, and remove the roof side inner garnish assembly LH.

  45. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY (w/ Power Back Door)


    1. w/o Rear No. 2 Seat:


      1. A017E6D

        Remove the bolt.

      2. Disengage the 5 clips and 2 guides, and remove the roof side inner garnish assembly LH.

    2. w/ Rear No. 2 Seat:


      1. A017DAD

        Disengage the 2 claws and 2 guides, and remove the rear No. 2 seat outer belt guide.

      2. A017EMC

        Remove the bolt.

      3. Disengage the 5 clips and 2 guides, and remove the roof side inner garnish assembly LH.

  46. REMOVE REAR NO. 2 SEAT OUTER BELT ASSEMBLY


    1. A017FL4

      Remove the bolt and disconnect the shoulder end of the rear No. 2 seat outer belt assembly.

    2. A017BVZ

      Remove the 2 bolts and the rear No. 2 seat outer belt assembly.