Click here

REAR NO. 2 SEAT INNER BELT ASSEMBLY INSTALLATION

Click here
Click here
  1. Click here

    INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY


    1. A017GAE

      Install the rear No. 2 seat inner belt assembly with the bolt.

      42 N*m 428 kgf*cm 31 ft.*lbf
      Note:

      Do not allow the anchor part of the rear No. 2 seat inner belt assembly to overlap the protruding part of the rear No. 2 seat bracket.

      Tip:

      Use the same procedure for the RH side and LH side.

  2. Click here

    INSTALL DECK FLOOR BOARD ASSEMBLY


    1. A017G15

      Install the rear deck floor board assembly with the 4 nuts and 4 bolts.

  3. Click here

    INSTALL REAR MAT


    1. A017F51

      Install the rear mat.

  4. Click here

    INSTALL DECK SIDE TRIM BOX LH


    1. A017CIY

      Install the deck side trim box LH as shown in the illustration.

    2. A017BZVE01

      Install the 2 deck side trim clips and the clip.

  5. Click here

    INSTALL REAR SEAT SIDE COVER LH


    1. A017BBU

      Engage the 2 clips and install the rear seat side cover LH.

  6. Click here

    INSTALL DECK SIDE TRIM BOX RH


    1. A017EFK

      Install the deck side trim box RH as shown in the illustration.

    2. A017FOPE01

      Install the 2 deck side trim clips and the clip.

  7. Click here

    INSTALL JACK CARRIER ASSEMBLY (for LHD)


    1. A017FWH

      Engage the 3 claws, and install the jack carrier assembly.

  8. Click here

    INSTALL JACK CARRIER ASSEMBLY (for RHD)


    1. A017G4W

      Engage the 3 claws, and install the jack carrier assembly.

  9. Click here

    INSTALL JACK ASSEMBLY (for LHD)


    1. A017EKS

      Install the jack assembly.

  10. Click here

    INSTALL JACK ASSEMBLY (for RHD)


    1. A017DSX

      Install the jack assembly.

  11. Click here

    INSTALL JACK CARRIER CUSHION (for LHD)


    1. A017ENI

      Install the jack carrier cushion.

  12. Click here

    INSTALL JACK CARRIER CUSHION (for RHD)


    1. A017D41

      Install the jack carrier cushion.

  13. Click here

    INSTALL JACK CARRIER SUPPORT

  14. Click here

    INSTALL REAR SEAT SIDE COVER RH


    1. A017EH1

      Engage the 2 clips and install the rear seat side cover RH.

  15. Click here

    INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  16. Click here

    INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY


    1. A017D36

      Engage the 2 guides and install the No. 2 deck board sub-assembly.

  17. Click here

    INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY


    1. A017F31

      Engage the 2 guides and install the No. 3 deck board sub-assembly.

  18. Click here

    INSTALL DECK BOARD ASSEMBLY


    1. A017CPI

      Install the deck board sub-assembly.