FRONT SEAT INNER BELT ASSEMBLY INSTALLATION


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Power Seat)


    1. A017FASE01

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Connect each connector and clamp.

  2. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat)


    1. A017FE2E01

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Connect each connector and clamp.

  3. INSTALL FRONT SEAT ASSEMBLY (for Power Seat)


    1. Place the front seat assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Connect the connectors under the seat.

    3. Connect the cable to the negative (-) battery terminal.

      Note

      When reconnected the cable, some systems need to be initialized Click here.

    4. Temporarily install the front seat assembly with the 4 bolts.

    5. Operate the power seat switch knob and move the seat to the rearmost position.

    6. A017FKLE01

      Tighten the 2 bolts on the front side of the seat.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

      Tech Tips

      Tighten the bolts in the order indicated in the illustration.

    7. Operate the power seat switch knob and move the seat to the foremost position.

    8. A017B0KE01

      Tighten the 2 bolts on the rear side of the seat.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

      Tech Tips

      Tighten the bolts in the order indicated in the illustration.

  4. INSTALL REAR INNER SEAT TRACK COVER (for Power Seat)


    1. A017DBE

      Engage the 2 claws and install the rear inner seat track cover.

  5. INSTALL REAR OUTER SEAT TRACK COVER (for Power Seat)


    1. A017DLU

      Engage the 2 claws and install the rear outer seat track cover.

  6. INSTALL FRONT INNER SEAT TRACK COVER (for Power Seat)


    1. Operate the power seat switch knob and move the seat to the rearmost position.

    2. A017F34

      Engage the 2 claws and install the front inner seat track cover.

  7. INSTALL FRONT OUTER SEAT TRACK COVER (for Power Seat)


    1. A017ET7

      Engage the 2 claws and install the front outer seat track cover.

  8. INSTALL FRONT SEAT HEADREST ASSEMBLY (for Power Seat)

  9. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)


    1. Place the front seat assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Connect the connectors under the seat.

    3. Temporarily install the front seat assembly with the 4 bolts.

    4. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    5. A017D8FE01

      Tighten the 2 bolts on the front side of the seat.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

      Tech Tips

      Tighten the bolts in the order indicated in the illustration.

    6. Lift up the seat track adjusting handle and move the seat to the foremost position.

    7. A017G32E01

      Tighten the 2 bolts on the rear side of the seat.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

      Tech Tips

      Tighten the bolts in the order indicated in the illustration.

  10. INSPECT FRONT SEAT SLIDE ADJUSTER LOCK (for Manual Seat)


    1. During sliding operation of the front seat, check that the left and right adjusters move together smoothly and lock simultaneously.

      If the seat adjusters do not lock simultaneously, loosen the bolts securing the seat to adjust the adjuster position.

  11. INSTALL REAR SEAT TRACK COVER (for Manual Seat)


    1. A017CWY

      Engage the 4 claws and install the 2 rear seat track covers.

  12. INSTALL FRONT INNER SEAT TRACK COVER (for Manual Seat)


    1. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    2. A017DLZ

      Engage the 2 claws and install the front inner seat track cover.

  13. INSTALL FRONT OUTER SEAT TRACK COVER (for Manual Seat)


    1. A017FOO

      Engage the 2 claws and install the front outer seat track cover.

  14. INSTALL FRONT SEAT HEADREST ASSEMBLY (for Manual Seat)

  15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for Manual Seat)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  16. INSPECT FRONT SEAT ASSEMBLY (for Power Seat)


    1. Inspect the power seat operation.

    2. w/ Seat Heater System:

      Check the seat heater operation.


      1. Turn the ignition switch on (IG).

      2. Turn the seat heater switch on.

      3. Wait 5 minutes or more and confirm that the seat surface becomes warm.

  17. INSPECT SRS WARNING LIGHT (w/ Front Seat Side Airbag)

    Click here