Click here

FRONT SEAT INNER BELT ASSEMBLY INSPECTION

Click here
Click here
  1. Click here

    INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. A017EE4E01

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Condition Specified Condition
      1 - 4 Seat belt is unfastened (Apply more than 25 N (2.5 kgf, 5.6 lbf) to occupant detection sensor) Below 100 Ω
      1 - 4 Seat belt is fastened (Apply more than 25 N (2.5 kgf, 5.6 lbf) to occupant detection sensor) 1 MΩ or higher

      If the result is not as specified, replace the inner belt assembly.