FRONT SEAT INNER BELT ASSEMBLY REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Manual Seat)

    CAUTION:

    Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Click here.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Manual Seat)

  3. REMOVE FRONT OUTER SEAT TRACK COVER (for Manual Seat)


    1. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    2. A017FOO

      Disengage the 2 claws and remove the front outer seat track cover.

  4. REMOVE FRONT INNER SEAT TRACK COVER (for Manual Seat)


    1. A017DLZ

      Disengage the 2 claws and remove the front inner seat track cover.

  5. REMOVE REAR SEAT TRACK COVER (for Manual Seat)


    1. Lift up the seat track adjusting handle and move the seat to the foremost position.

    2. A017CWY

      Disengage the 4 claws and remove the 2 rear seat track covers.

  6. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)


    1. A017G32

      Remove the 2 bolts on the rear side of the seat.

    2. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    3. A017D8F

      Remove the 2 bolts on the front side of the seat.

    4. Lift up the seat track adjusting handle and move the seat to the center position. Also, operate the reclining adjuster release handle and move the seatback to the upright position.

    5. Disconnect the connectors under the front seat assembly.

    6. Remove the front seat assembly.

      Note

      Be careful not to damage the vehicle body.

  7. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Power Seat)

  8. REMOVE FRONT OUTER SEAT TRACK COVER (for Power Seat)


    1. Operate the power seat switch knob and move the seat to the rearmost position.

    2. A017ET7

      Disengage the 2 claws and remove the front outer seat track cover.

  9. REMOVE FRONT INNER SEAT TRACK COVER (for Power Seat)


    1. A017F34

      Disengage the 2 claws and remove the front inner seat track cover.

  10. REMOVE REAR OUTER SEAT TRACK COVER (for Power Seat)


    1. Operate the power seat switch knob and move the seat to the foremost position.

    2. A017DLU

      Disengage the 2 claws and remove the rear outer seat track cover.

  11. REMOVE REAR INNER SEAT TRACK COVER (for Power Seat)


    1. A017DBE

      Disengage the 2 claws and remove the rear inner seat track cover.

  12. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)


    1. A017B0K

      Remove the 2 bolts on the rear side of the seat.

    2. Operate the power seat switch knob and move the seat to the rearmost position.

    3. A017FKL

      Remove the 2 bolts on the front side of the seat.

    4. Operate the power seat switch knob and move the seat to the center position. Also, Operate the power seat switch knob and move the seatback to the upright position.

    5. Disconnect the cable from the negative (-) battery terminal.

      CAUTION:


      • Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent the airbag and seat belt pretensioner from deploying Click here.

      • If the side airbag was deployed, replace the front seat assembly with a new one.

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

    6. Disconnect each connector under the front seat assembly.

    7. Remove the front seat assembly.

      Note

      Be careful not to damage the vehicle body.

  13. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat)


    1. Disconnect each connector and clamp.

    2. A017ECU

      Remove the nut and the front seat inner belt assembly.

  14. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Power Seat)


    1. Disconnect each connector and clamp.

    2. A017FR3

      Remove the nut and the front seat inner belt assembly.