FRONT PASSENGER SEAT BELT WARNING LIGHT INSTALLATION


  1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY (w/o Radio Receiver)

  2. INSTALL RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver)


    1. Install the radio tuner opening cover with bracket to the integration control panel assembly with the 2 screws.

  3. INSTALL NAVIGATION RECEIVER ASSEMBLY (w/ Navigation System)

  4. INSTALL NO. 2 RADIO BRACKET (w/ Navigation System)


    1. A017F9I

      Install the No. 2 radio bracket with the 6 screws.

  5. INSTALL NO. 1 RADIO BRACKET (w/ Navigation System)


    1. A017DOO

      Install the No. 1 radio bracket with the 6 screws.

    2. A017GBL

      Engage the claw and connect the connector.

  6. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY (w/ Radio Receiver)


    1. A017E6N

      Engage the 2 clips and install the integration control and panel assembly.

    2. A017E42

      Engage the claw and connect the connector.

  7. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY WITH BRACKET (w/o Radio Receiver)


    1. Connect each connector.

    2. A017C93

      Engage the 4 clips.

    3. Install the integration control and panel assembly with bracket with the 4 bolts <D>.

  8. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)


    1. Connect each connector.

    2. A017CTX

      Engage the 4 clips.

    3. A017EUS

      Install the navigation receiver assembly with bracket with the 4 bolts.

  9. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)


    1. Connect each connector.

    2. A017EFV

      Engage the 4 clips.

    3. A017FXP

      Install the radio receiver assembly with bracket with the 4 bolts.

  10. INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY (for Manual Air Conditioning System)


    1. Connect the connector.

    2. A017G04

      Engage the 4 clips and install the heater control and accessory assembly.

  11. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)


    1. Connect the connector.

    2. A017EE0

      Engage the 4 clips and install the air conditioning control assembly.

  12. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Smart Entry and Start System)


    1. A017EYQE01

      Apply protective tape to the areas shown in the illustration.

    2. Connect each connector.

    3. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

      Note

      Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.

  13. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Entry and Start System)


    1. A017D5UE01

      Apply protective tape to the areas shown in the illustration.

    2. Connect each connector.

    3. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

      Note

      Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.

  14. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A017DC8

      Engage the 2 claws and 5 clips, and install the center instrument panel register assembly.

  15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Navigation System for HDD)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.