FRONT SEAT SIDE AIRBAG ASSEMBLY REMOVAL

CAUTION:


  • Be sure to read Precaution thoroughly before servicing Click here.

  • If the side airbag has deployed, replace the front seat assembly with a new one.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE FRONT SEAT ASSEMBLY

    for Manual Seat: Click here

    for Power Seat: Click here

  3. SEPARATE AIRBAG WIRE HARNESS (for Manual Seat)


    1. A017CMM

      Disengage the 2 hooks.

    2. A017FJL

      Disengage the claw and 4 clamps.

  4. SEPARATE AIRBAG WIRE HARNESS (for Power Seat)


    1. A017CMM

      Disengage the 2 hooks.

    2. A017F2Z

      Disengage the claw and 4 clamps.

  5. REMOVE FRONT SEATBACK COVER WITH PAD


    1. w/ Seat Heater:


      1. A017DE1

        Disconnect the connector.

      2. Disengage the 2 clamps.

    2. A017BPS

      Remove the 3 hog rings.

    3. A017CEU

      Open the 2 fasteners.

    4. A017CCU

      Remove the 2 hog rings.

    5. A017EI4

      Disengage the 2 hooks.

    6. A017FCWE01

      Turn back the separate type front seatback cover.

    7. Remove the nut and disengage the hook to separate the separate type front seatback cover bracket.

    8. A017DQF

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    9. Remove the front seatback cover with pad from the front seat frame assembly with adjuster.

  6. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. A017ETG

      Disengage the 2 clamps and separate the airbag wire harness.

    2. Remove the 2 nuts and front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.