CURTAIN SHIELD AIRBAG ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedures listed below are for the LH side.


  1. PRECAUTION

    CAUTION:

    Be sure to read "PRECAUTION" thoroughly before servicing Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait for at least 90 seconds after disconnecting the cable to prevent airbag deployment.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  4. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY


    1. Disconnect the curtain shield airbag connector.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

    2. Remove the 11 bolts .

      A017DKE

    3. Disengage the 11 hooks and remove the curtain shield airbag assembly.

      A017BSE