Click here

FRONT PASSENGER AIRBAG ASSEMBLY REMOVAL

Click here
Click here
  1. Click here

    PRECAUTION

    CAUTION:

    Be sure to read "PRECAUTION" thoroughly before servicing (Click here).

  2. Click here

    REMOVE FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side)

    Tip:

    Refer to the procedure up to Remove Front No. 2 Speaker Assembly (Click here).

  3. Click here

    DISCONNECT INSTRUMENT PANEL WIRE ASSEMBLY


    1. A017CY2

      Disconnect the connector.

  4. Click here

    REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY


    1. Disconnect each connector.

    2. Remove the 2 passenger airbag bolts <A>.

    3. A017FGUE01

      Disengage each clamp.

    4. Remove the 2 clips.

    5. Remove the 2 bolts <D> and nut <G>.

    6. A017FQ8E03

      Disengage the 5 claws and remove the instrument panel safety pad assembly.

  5. Click here

    REMOVE NO. 4 HEATER TO REGISTER DUCT


    1. A017DAC

      Remove the 3 screws <E> and the No. 4 heater to register duct.

  6. Click here

    REMOVE FRONT PASSENGER AIRBAG ASSEMBLY


    1. A017FCK

      Remove the 2 screws.

    2. A017FOK

      Disengage the 5 hooks.

    3. A017C7Q

      Disengage the 5 hooks and remove the front passenger airbag assembly from the instrument panel safety pad assembly as shown in the illustration.

  7. Click here

    REMOVE INSTRUMENT PANEL WIRE ASSEMBLY


    1. A017EBPE01

      Disconnect the 2 airbag connectors.

      Note:

      When handling the airbag connector, take care not to damage the airbag wire harness.

    2. Remove the clamp and instrument panel wire assembly from the front passenger airbag assembly.