DRIVER SIDE KNEE AIRBAG ASSEMBLY ON-VEHICLE INSPECTION


  1. INSPECT DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)


    1. Perform a diagnostic system check Click here.

    2. A017DTH

      With the driver side knee airbag assembly installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the driver side knee airbag assembly with a new one:

      Cuts, minute cracks or marked discoloration on the driver side knee airbag assembly.

  2. INSPECT DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)


    1. Perform a diagnostic system check Click here.

    2. A017DYN

      With the driver side knee airbag assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the driver side knee airbag assembly with a new one:


      • Cuts, minute cracks or marked discoloration on the driver side knee airbag assembly.

      • Cracks or other damage to the connector.

      • Deformation or cracks on the instrument panel reinforcement.

      CAUTION:

      Be sure to follow the correct removal and installation procedures.