Click here

AIR CONDITIONING PANEL (for Manual Air Conditioning System) REMOVAL

Click here
Click here
  1. Click here

    REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. A017BKEE01

      Apply protective tape to the areas shown in the illustration.

    2. Using a moulding remover, disengage the 10 claws and 8 clips starting from the upper part of the center instrument cluster finish panel assembly.

      Note:

      Do not pull on the small storage compartment lid. Doing so may cause damage.

    3. Disconnect each connector and remove the center instrument cluster finish panel assembly.

  2. Click here

    REMOVE HEATER CONTROL AND ACCESSORY ASSEMBLY


    1. A017G04

      Disengage the 4 clips and remove the heater control and accessory assembly.

    2. Disconnect the connector.