Click here

REAR EVAPORATOR TEMPERATURE SENSOR INSTALLATION

Click here
Click here
  1. Click here

    INSTALL REAR EVAPORATOR TEMPERATURE SENSOR


    1. A017G4I

      Engage the claw and clamp.

    2. Connect the 3 connectors and install the rear evaporator temperature sensor.

  2. Click here

    INSTALL REAR NO. 5 AIR DUCT


    1. A017F7Y

      Install the rear No. 5 air duct with the 2 clips.

  3. Click here

    INSTALL NO. 1 COOLER AIR DUCT


    1. A017F8AE01

      Install the No. 1 cooler air duct as shown in the illustration.

  4. Click here

    INSTALL COOLER PLATE


    1. A017E65

      Engage the 2 claws and install the cooler plate.

  5. Click here

    INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

    Tip:

    Use the same procedure for the RH side and the LH side.

  6. Click here

    INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH


    1. Engage the 4 clips and 7 claws.

    2. Install the 2 clips.

    3. A017FTC

      Install the deck trim side panel assembly RH with the 3 bolts.

  7. Click here

    INSTALL FRONT DECK SIDE TRIM COVER RH

    Tip:

    Use the same procedure for the RH side and the LH side.

  8. Click here

    INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Tip:

    Use the same procedure for the No. 1 luggage compartment trim hook and the No. 2 deck side trim hook.

  9. Click here

    INSTALL ROPE HOOK ASSEMBLY (for RH Side)

    Tip:

    Use the same procedure for the RH side and the LH side.

  10. Click here

    INSTALL REAR COMBINATION LIGHT SERVICE COVER RH


    1. A017DDV

      Engage the 2 guides and 6 claws, and install the rear combination light service cover RH.

  11. Click here

    INSTALL SIDE TRIM COVER RH (for Manual Air Conditioning System)


    1. A017CSI

      Engage the 4 claws, and install the side trim cover RH.

  12. Click here

    INSTALL REAR ROOM TEMPERATURE SENSOR (for Automatic Air Conditioning System)


    1. Connect the connector.

    2. A017B3P

      Engage the 4 claws and install the rear room temperature sensor.

  13. Click here

    INSTALL DECK SIDE TRIM RH

    Tip:

    Use the same procedure for the RH side and the LH side.

  14. Click here

    INSTALL DECK SIDE TRIM COVER NO.1

    Tip:

    Use the same procedure for the RH side and the LH side.

  15. Click here

    INSTALL REAR SEAT SIDE GARNISH CAP


    1. A017ER4

      Engage the guide and 6 claws.

    2. Install the rear seat side garnish cap with the screw.

  16. Click here

    INSTALL REAR FLOOR FINISH PLATE


    1. A017BSY

      Engage the 4 clips and 4 claws, and install the rear floor finish plate.

  17. Click here

    INSTALL REAR NO. 2 SEAT ASSEMBLY

    (Click here)

  18. Click here

    INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH


    1. A017FFPE01

      Align the alignment mark (green) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip RH.

      Note:

      After installation, check that the corners fit correctly.

  19. Click here

    INSTALL REAR DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure for the RH side and the LH side.