Click here

REAR EVAPORATOR TEMPERATURE SENSOR REMOVAL

Click here
Click here
  1. Click here

    REMOVE REAR DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure for the RH side and the LH side.

  2. Click here

    REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tip:

    Use the same procedure for the RH side and the LH side.

  3. Click here

    REMOVE REAR NO. 2 SEAT ASSEMBLY

    (Click here)

  4. Click here

    REMOVE REAR FLOOR FINISH PLATE


    1. A017BSY

      Disengage the 4 clips and 4 claws, and remove the rear floor finish plate.

  5. Click here

    REMOVE REAR SEAT SIDE GARNISH CAP


    1. A017FP0

      Remove the screw.

    2. Disengage the 6 claws and the guide, and remove the rear seat side garnish cap.

  6. Click here

    REMOVE DECK SIDE TRIM COVER NO.1

    Tip:

    Use the same procedure for the RH side and the LH side.

  7. Click here

    REMOVE DECK SIDE TRIM RH

    Tip:

    Use the same procedure for the RH side and the LH side.

  8. Click here

    REMOVE SIDE TRIM COVER RH (for Manual Air Conditioning System)


    1. A017CSI

      Disengage the 4 claws and remove the side trim cover RH.

  9. Click here

    REMOVE REAR ROOM TEMPERATURE SENSOR (for Automatic Air Conditioning System)


    1. A017B3P

      Disengage the 4 claws and remove the rear room temperature sensor.

    2. Disconnect the connector.

  10. Click here

    REMOVE REAR COMBINATION LIGHT SERVICE COVER RH


    1. A017BZ2E01

      Using a screwdriver, disengage the 6 claws and 2 guides, and remove the rear combination light service cover RH.

      Tip:

      Tape the screwdriver tip before use.

  11. Click here

    REMOVE ROPE HOOK ASSEMBLY (for RH Side)

    Tip:

    Use the same procedure for the RH side and the LH side.

  12. Click here

    REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Tip:

    Use the same procedure for the No. 1 luggage compartment trim hook and the No. 2 deck side trim hook.

  13. Click here

    REMOVE FRONT DECK SIDE TRIM COVER RH

    Tip:

    Use the same procedure for the RH side and the LH side.

  14. Click here

    REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH


    1. Remove the 3 bolts.

    2. Remove the 2 clips.

    3. A017FTC

      Disengage the 7 claws and 4 clips, and remove the deck trim side panel assembly RH.

  15. Click here

    REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH

    Tip:

    Use the same procedure for the RH side and the LH side.

  16. Click here

    REMOVE COOLER PLATE


    1. A017E65

      Disengage the 2 claws and remove the cooler plate.

  17. Click here

    REMOVE NO. 1 COOLER AIR DUCT


    1. A017G6ME01

      Remove the No. 1 cooler air duct as shown in the illustration.

  18. Click here

    REMOVE REAR NO. 5 AIR DUCT


    1. A017F7Y

      Remove the 2 clips and the rear No. 5 air duct.

  19. Click here

    REMOVE REAR EVAPORATOR TEMPERATURE SENSOR


    1. A017G4I

      Disconnect the 3 connectors.

    2. Disengage the clamp.

    3. Disengage the claw and remove the rear evaporator temperature sensor.