COMPRESSOR INSPECTION


  1. INSPECT COMPRESSOR AND MAGNETIC CLUTCH (A/C LOCK SENSOR)


    1. A017FN5E06

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Condition Specified Condition
      B44-2 (SSR+) - B44-5 (SSR-) 20°C (68°F) 160 to 320 Ω

      If the resistance is not as specified, replace the compressor and magnetic clutch.

  2. INSPECT COMPRESSOR AND MAGNETIC CLUTCH (A/C COMPRESSOR SOLENOID)


    1. A017FN5E07

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Condition Specified Condition
      B44-3 (SOL+) - B44-6 (SOL-) 25°C (77°F) 10.1 to 11.1 Ω

      If the resistance is not as specified, replace the compressor and magnetic clutch.

  3. INSPECT COMPRESSOR AND MAGNETIC CLUTCH


    1. A017FN5E08

      Disconnect the connector from the magnetic clutch.

    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Condition Specified Condition
      B44-1 (MG+) - Body Ground Always Below 1 Ω

      If the resistance is not as specified, replace the compressor and magnetic clutch.