COMPRESSOR DISASSEMBLY


  1. REMOVE MAGNETIC CLUTCH ASSEMBLY


    1. A017DJQE01
      Text in Illustration
      *1 SST

      Place the compressor and magnetic clutch in a vise.

      SST
      09985-00270

    2. Using SST, hold the magnetic clutch hub.

    3. Remove the bolt, magnetic clutch hub, and magnetic clutch washers.

      Tech Tips

      There is no set number of magnetic clutch washers because they are used for adjustment.

    4. A017CT9

      Using a snap ring expander, remove the snap ring and then remove the magnetic clutch rotor.

      Note

      Take care not to damage the seal cover of the bearing when removing the snap ring.

    5. A017CEB

      Disconnect the connector.

    6. Disengage the clamp.

    7. Remove the screw and the bracket.

    8. A017CP7

      Using a snap ring expander, remove the snap ring and magnetic clutch stator.