Click here

PTC HEATER ASSEMBLY INSTALLATION

Click here
Click here
  1. Click here

    INSTALL QUICK HEATER ASSEMBLY


    1. A017EXE

      Install the quick heater assembly with the 3 screws as shown in the illustration.

    2. Connect the 2 connectors.

  2. Click here

    INSTALL NO. 3 AIR DUCT SUB-ASSEMBLY


    1. A017D5A

      Engage the 3 claws and install the No. 3 air duct sub-assembly as shown in the illustration.

  3. Click here

    INSTALL FRONT NO. 2 CONSOLE BOX INSERT


    1. A017BSW

      Engage the claw and 2 guides.

    2. Install the front No. 2 console box insert with the 3 screws <E> and clip.

  4. Click here

    INSTALL CONSOLE BOX ASSEMBLY


    1. A017E8O

      Engage the 6 claws.

    2. Connect the connector.

    3. A017C3F

      Install the console box assembly with the 4 bolts and 2 screws.

  5. Click here

    INSTALL LOWER REAR CONSOLE BOX


    1. Install the lower rear console box.

  6. Click here

    INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A017FDP

      Connect the connector.

    2. Engage the 4 claws and 4 clips, and install the upper console panel sub-assembly.

  7. Click here

    INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    1. Connect each connector and clamp.

    2. A017F5K

      Engage the 4 claws and 3 clips.

    3. Install the lower instrument panel sub-assembly with the 2 bolts <B> and 3 screws <E>.

  8. Click here

    INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A017F65

      Engage the 2 guides.

    2. Engage the 3 claws and install the No. 2 instrument panel under cover sub-assembly.

  9. Click here

    INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

    Tip:

    Use the same procedure for the RH side and the LH side.

  10. Click here

    INSTALL FRONT DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure for the RH side and the LH side.

  11. Click here

    INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System)


    1. Connect each connector.

    2. A017EFV

      Engage the 4 clips.

    3. A017FXP

      Install the radio receiver assembly with bracket with the 4 bolts.

  12. Click here

    INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)


    1. Connect each connector.

    2. A017CTX

      Engage the 4 clips.

    3. A017EUS

      Install the navigation receiver assembly with bracket with the 4 bolts.

  13. Click here

    INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY WITH BRACKET (w/o Radio Receiver)


    1. Connect each connector.

    2. A017C93

      Engage the 4 clips.

    3. Install the integration control and panel assembly with bracket with the 4 bolts <D>.

  14. Click here

    INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY (for Manual Air Conditioning System)


    1. Connect the connector.

    2. A017G04

      Engage the 4 clips and install the heater control and accessory assembly.

  15. Click here

    INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)


    1. Connect the connector.

    2. A017EE0

      Engage the 4 clips and install the air conditioning control assembly.

  16. Click here

    INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Smart Entry and Start System)


    1. A017EYQE01

      Apply protective tape to the areas shown in the illustration.

    2. Connect each connector.

    3. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

      Note:

      Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.

  17. Click here

    INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Entry and Start System)


    1. A017D5UE01

      Apply protective tape to the areas shown in the illustration.

    2. Connect each connector.

    3. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

      Note:

      Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.

  18. Click here

    INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A017DC8

      Engage the 2 claws and 5 clips, and install the center instrument panel register assembly.

  19. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Navigation System for HDD)

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).