AIR MIX CONTROL SERVO MOTOR (for Rear) REMOVAL


  1. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  3. REMOVE DECK BOARD ASSEMBLY


    1. A017CPI

      Remove the deck board assembly.

  4. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY


    1. A017F31

      Disengage the 2 guides and remove the No. 3 deck board sub-assembly.

  5. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY


    1. A017D36

      Disengage the 2 guides and remove the No. 2 deck board sub-assembly.

  6. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Remove the tonneau cover assembly.

  7. REMOVE REAR SEAT SIDE COVER LH


    1. A017BBU

      Disengage the 2 clips and remove the rear seat side cover LH.

  8. REMOVE DECK SIDE TRIM BOX LH


    1. A017BZVE01

      Remove the 2 deck side trim clips and clip.

    2. Remove the deck side trim box LH as shown in the illustration.

      A017G2A

  9. REMOVE REAR SEAT SIDE COVER RH


    1. A017EH1

      Disengage the 2 clips and remove the rear seat side cover RH.

  10. REMOVE JACK CARRIER SUPPORT

  11. REMOVE JACK CARRIER CUSHION (for LHD)


    1. A017ENI

      Remove the jack carrier cushion.

  12. REMOVE JACK CARRIER CUSHION (for RHD)


    1. A017D41

      Remove the jack carrier cushion.

  13. REMOVE JACK ASSEMBLY (for LHD)


    1. A017EKS

      Remove the jack assembly.

  14. REMOVE JACK ASSEMBLY (for RHD)


    1. A017DSX

      Remove the jack assembly.

  15. REMOVE JACK CARRIER ASSEMBLY (for LHD)


    1. A017EAS

      Using a screwdriver, disengage the 3 claws and remove the jack carrier assembly.

  16. REMOVE JACK CARRIER ASSEMBLY (for RHD)


    1. A017D6R

      Using a screwdriver, disengage the 3 claws and remove the jack carrier assembly.

  17. REMOVE DECK SIDE TRIM BOX RH


    1. A017FOPE01

      Remove the 2 deck side trim clips and clip.

    2. Remove the deck side trim box RH as shown in the illustration.

      A017E9B

  18. REMOVE REAR MAT


    1. A017F51

      Remove the rear mat.

  19. REMOVE DECK FLOOR BOARD ASSEMBLY


    1. A017FMA

      Disengage the 3 claws.

    2. Remove the 2 nuts and the deck floor board assembly.

  20. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY


    1. A017GAE

      Remove the bolt and rear No. 2 seat inner belt assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  21. DISCONNECT REAR SEAT LAP TYPE BELT ASSEMBLY LH


    1. A017F2F

      Remove the bolt and disconnect the rear seat lap type belt assembly LH.

  22. DISCONNECT REAR SEAT LAP TYPE BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  23. REMOVE REAR NO. 2 SEAT ASSEMBLY


    1. A017E5S

      Remove the 4 bolts and the rear No. 2 seat assembly.

  24. REMOVE REAR FLOOR FINISH PLATE


    1. A017BSY

      Disengage the 4 clips and the 4 claws, and remove the rear floor finish plate.

  25. REMOVE REAR SEAT SIDE GARNISH CAP


    1. A017FP0

      Remove the screw.

    2. Disengage the 6 claws and the guide, and remove the rear seat side garnish cap.

  26. REMOVE DECK SIDE TRIM COVER NO.1

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  27. REMOVE DECK SIDE TRIM RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  28. REMOVE SIDE TRIM COVER RH (for Manual Air Conditioning System)


    1. A017CSI

      Disengage the 4 claws and remove the side trim cover RH.

  29. REMOVE REAR ROOM TEMPERATURE SENSOR (for Automatic Air Conditioning System)


    1. A017B3P

      Disengage the 4 claws and remove the rear room temperature sensor.

    2. Disconnect the connector.

  30. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH


    1. A017BZ2E01

      Using a screwdriver, disengage the 6 claws and the 2 guides, and remove the rear combination light service cover RH.

      Tech Tips

      Tape the screwdriver tip before use.

  31. REMOVE ROPE HOOK ASSEMBLY (for RH Side)

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  32. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Tech Tips

    Use the same procedure for the No. 1 luggage compartment trim hook and the No. 2 deck side trim hook.

  33. REMOVE FRONT DECK SIDE TRIM COVER RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  34. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH


    1. Remove the 3 bolts.

    2. Remove the 2 clips.

    3. Disengage the 7 claws and 4 clips, and remove the deck trim side panel assembly RH.

      A017FTC

  35. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  36. REMOVE REAR AIR MIX CONTROL SERVO MOTOR SUB-ASSEMBLY


    1. A017FP9

      Disconnect the connector.

    2. Remove the 2 screws and rear air mix control servo motor sub-assembly.