FRONT CONSOLE BOX (for 5-Passenger with Ottoman) INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL CONSOLE BOX ASSEMBLY


    1. Attach the 2 clips to install the console box assembly.

    2. Install the 2 screws and 4 bolts.

    3. Connect the 4 connectors and attach the wire harness clamp.

  2. INSTALL NO. 2 CONSOLE BOX DUCT


    1. Install the No. 2 console box duct with the 2 clips.

  3. INSTALL CONSOLE COMPARTMENT BOX ASSEMBLY WITH TELEVISION DISPLAY


    1. Connect the 4 connectors.

    2. Move the console compartment box assembly with television display upward to attach the 2 hooks.

    3. Install the console compartment box assembly with television display with the 6 bolts.

  4. INSTALL REAR NO. 1 CONSOLE END PANEL GARNISH


    1. Attach the 4 guides and 2 clips to install the rear No. 1 console end panel garnish.

    2. Install the 2 screws.

  5. INSTALL REAR NO. 2 CONSOLE END PANEL GARNISH

    Tech Tips

    Use the same procedure described for the rear No. 1 console end panel garnish.

  6. INSTALL REAR CONSOLE BOX GARNISH

    A01GIU7

    1. Attach the 2 clips to install the rear console box garnish.

  7. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH

    A01GLJX

    1. Install the upper No. 1 console panel garnish with the 2 screws.

  8. INSTALL UPPER REAR CONSOLE PANEL GARNISH

    A01GK9C

    1. Attach the 3 guides and 5 clips to install the upper rear console panel garnish.

  9. INSTALL LOWER CONSOLE COVER


    1. Install the lower console cover.

  10. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. Connect the connector.

    2. Attach the 5 guides and 4 clips to install the lower No. 1 instrument panel finish panel.

  11. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL


    1. Attach the 5 guides and 4 clips to install the lower No. 2 instrument panel finish panel.

  12. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Attach the 6 clips to install the upper console panel sub-assembly.

    2. Connect the connector.

  13. INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL


    1. Attach the 5 clips to install the upper instrument cluster finish panel.

  14. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY


    1. Connect each connector and attach each wire harness clamp.

    2. A01GNRT

      Attach the 6 clips to install the upper rear console panel sub-assembly.

    3. Install the 2 screws.

  15. INSTALL NO. 3 BOX PANEL


    1. Attach the 4 claws to install the No. 3 box panel.

  16. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01GITL

      Twist the shift lever knob sub-assembly in the direction indicated by the arrow to install it.

    2. A01GJKF

      Pull up the shift lever boot to connect it to the shift lever knob sub-assembly.

  17. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the rear part of the instrument panel finish panel end LH 3 clips.

    2. Attach the front part of the instrument panel finish panel end LH 6 clips to install the instrument panel finish panel end LH.

  18. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Tech Tips

    Use the same procedure described for the LH side.