PRECAUTION
Note
After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.
REMOVE COWL TOP VENTILATOR LOUVER RH
Remove the 6 clips and cowl top ventilator louver RH.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP
| *1 | Protective Tape |
Using a screwdriver, detach the 3 claws.
Tech Tips
Tape the screwdriver tip before use.
Remove the 2 screws and luggage compartment door assist grip.
REMOVE SWITCH BEZEL
Using a screwdriver, detach the 2 claws and remove the switch bezel.
Tech Tips
Tape the screwdriver tip before use.
REMOVE NO. 2 COURTESY LIGHT ASSEMBLY
| *1 | Protective Tape |
Using a screwdriver, detach the 2 claws and remove the No. 2 courtesy light assembly.
Tech Tips
Tape the screwdriver tip before use.
REMOVE REAR COMBINATION LIGHT SERVICE COVER LH
Detach the 2 claws and remove the rear combination light service cover LH.
REMOVE REAR COMBINATION LIGHT SERVICE COVER RH
Tech Tips
Use the same procedure described for the LH side.
REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH
Using a clip remover, remove the 3 clips and luggage compartment door hinge cover LH.
REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH
Tech Tips
Use the same procedure described for the LH side.
REMOVE BACK DOOR TRIM COVER
Using a clip remover, remove the 4 clips.
Detach the 10 clips and back door trim cover.
REMOVE LUGGAGE COMPARTMENT DOOR CLOSER SWITCH
Disconnect the connector.
Remove the 2 screws and luggage compartment door closer switch.