LUGGAGE COMPARTMENT DOOR CLOSER ASSEMBLY INSPECTION


  1. INSPECT LUGGAGE DOOR CLOSER ASSEMBLY


    1. A01GKL1E02
      Text in Illustration
      *a

      Component without harness connected

      (Luggage Door Closer Assembly)

      Apply battery voltage to the closer motor and check operation of the motor.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1 (M+)

      Battery negative (-) → Terminal 4 (M-)

      		 Clockwise

      Battery positive (+) → Terminal 4 (M-)

      Battery negative (-) → Terminal 1 (M+)

      		 Counterclockwise (jam protection function operating)

      If the result is not as specified, replace the luggage door closer assembly.

    2. A01GLWYE02
      Text in Illustration
      *a

      Component without harness connected

      (Luggage Door Closer Assembly)
      *b Full Latch
      *c Half Latch

      Set the luggage door closer assembly to half latch.

    3. Apply battery voltage to the closer connector and check the closer operation.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1 (M+)

      Battery negative (-) → Terminal 4 (M-)

      		 Clockwise

      If the result is not as specified, replace the luggage door closer assembly.