LUGGAGE COMPARTMENT DOOR CLOSER ASSEMBLY REMOVAL


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. REMOVE COWL TOP VENTILATOR LOUVER RH


    1. A01GM4S

      Remove the 6 clips and cowl top ventilator louver RH.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. A01GMO6E03
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 3 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01GLUL

      Remove the 2 screws and luggage compartment door assist grip.

  5. REMOVE SWITCH BEZEL


    1. A01GJRX

      Using a screwdriver, detach the 2 claws and remove the switch bezel.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE NO. 2 COURTESY LIGHT ASSEMBLY


    1. A01GN4SE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and remove the No. 2 courtesy light assembly.

      Tech Tips

      Tape the screwdriver tip before use.

  7. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH


    1. A01GLPC

      Detach the 2 claws and remove the rear combination light service cover LH.

  8. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH


    1. A01GM53

      Using a clip remover, remove the 3 clips and luggage compartment door hinge cover LH.

  10. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. REMOVE BACK DOOR TRIM COVER


    1. A01GJGA

      Using a clip remover, remove the 4 clips.

    2. Detach the 10 clips and back door trim cover.

  12. REMOVE LUGGAGE DOOR CLOSER ASSEMBLY


    1. A01GL8U

      Disconnect the connector.

    2. Remove the 3 bolts and luggage door closer assembly.

    3. Disconnect the cable.