HOOD SUPPORT REMOVAL

Note


  • As much as possible avoid touching the stroke portions of the rod to prevent foreign matter from attaching to it. Be sure to hold the cylinders while servicing.

  • Do not wear cotton gloves or other similar materials when handling the rod. Fibers may attach to the rod and result in gas leaks.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE ENGINE ROOM SIDE COVER LH


    1. A01GKBH

      Remove the 5 clips and engine room side cover LH.

  2. REMOVE FRONT FENDER PROTECTOR UPPER LH


    1. A01GKUH

      Using a screwdriver, detach the 3 clips and remove the front fender protector upper LH.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE HOOD SUPPORT ASSEMBLY LH


    1. A01GLQPE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, remove the hood support assembly LH while releasing the 2 clips.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Remove the hood support assembly while supporting the hood by hand.

  4. REMOVE BRACKET HOOD STAY LH


    1. A01GK1A

      Remove the bolt and bracket hood stay LH.

      Note

      Remove the hood support assembly while supporting the hood by hand.

  5. REMOVE HOOD SUPPORT BRACKET LH


    1. A01GJ6T

      Remove the 2 bolts and hood support bracket LH.

      Note

      Remove the hood support assembly while supporting the hood by hand.