CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER LH
Set the separate type rear seat cushion cover LH in place.
| *1 | Hog Ring Pliers |
Using hog ring pliers, install the separate type rear seat cushion cover LH to the rear seat cushion pad LH with 15 new hog rings.
Note
Be careful not to damage the separate type rear seat cushion cover LH.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seat cushion cover LH.
INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL REAR SEAT CUSHION SPRING ASSEMBLY LH
| *1 | Hog Ring Pliers |
Set the rear seat cushion spring assembly LH in place.
Using hog ring pliers, install the rear seat cushion spring assembly LH to the rear seat cushion cover with pad LH with 22 new hog rings.
Note
Be careful not to damage the rear seat cushion cover with pad LH.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the rear seat cushion cover with pad LH.
INSTALL REAR SEAT CUSHION SPRING ASSEMBLY RH
Tech Tips
Use the same procedures described for the LH side.
INSTALL REAR SEAT CUSHION ASSEMBLY LH
Connect the connector.
Attach the rear hook of the rear seat cushion assembly LH to the rear No. 2 seat adjuster assembly.
Note
Be careful not to damage the vehicle body.
Attach the 2 front hooks of the rear seat cushion assembly LH to the rear No. 2 seat adjuster assembly.
INSTALL REAR SEAT CUSHION ASSEMBLY RH
Tech Tips
Use the same procedures described for the LH side.
CHECK REAR SEAT ASSEMBLY