REAR SEAT CUSHION HEATER (for Power Seat) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE REAR SEAT CUSHION ASSEMBLY LH

    A01GLQWE01

    1. Detach the 2 front hooks of the rear seat cushion assembly LH from the rear No. 2 seat adjuster assembly.

      Note


      • If the areas close to the insertion location of the rear seat cushion lock hooks (A) are not lifted straight up, the cushion spring may become deformed.

      • When lifting the rear seat cushion assembly LH, lift it quickly so that force is applied directly to the hooks. Do not lift it slowly.

      Specification
      Area Measurement
      a 114 mm (4.49 in.)
      b 100 mm (3.94 in.)

    2. Detach the rear hook of the rear seat cushion assembly LH to remove the rear seat cushion assembly LH from the rear seatback spring assembly LH.

      Note

      Be careful not to damage the vehicle body.

    3. Disconnect the connector.

  2. REMOVE REAR SEAT CUSHION ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. REMOVE REAR SEAT CUSHION SPRING ASSEMBLY LH


    1. A01GK16

      Remove the 22 hog rings and rear seat cushion spring assembly LH from the rear seat cushion cover with pad LH.

  4. REMOVE REAR SEAT CUSHION SPRING ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  5. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER LH


    1. A01GHM0

      Remove the 15 hog rings and separate type rear seat cushion cover LH from the rear seat cushion pad LH.

  6. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER RH

    Tech Tips

    Use the same procedures described for the LH side.