FRONT SEAT CUSHION HEATER INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. Set the separate type front seat cushion cover in place.

    2. for Driver Side:


      1. A01GJTYE01
        Text in Illustration
        *1 Hog Ring Pliers

        except Sport Package:

        Using hog ring pliers, install the separate type front seat cushion cover to the front seat cushion pad with 21 new hog rings.

        Note


        • Be careful not to damage the separate type front seat cushion cover.

        • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

      2. A01GIGXE01
        Text in Illustration
        *1 Hog Ring Pliers

        for Sport Package:

        Using hog ring pliers, install the separate type front seat cushion cover to the front seat cushion pad with 17 new hog rings.

        Note


        • Be careful not to damage the separate type front seat cushion cover.

        • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

      3. A01GLG8

        Install the 2 clips.

    3. for Front Passenger Side:

      for Ottoman:


      1. A01GM5ME01
        Text in Illustration
        *1 Hog Ring Pliers

        Using hog ring pliers, install the separate type front seat cushion cover to the seat cushion pad with 21 new hog rings.

        Note


        • Be careful not to damage the separate type front seat cushion cover.

        • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

      2. A01GK91

        Install the 2 clips.

    4. for Front Passenger Side:

      except Ottoman:


      1. A01GJKLE01
        Text in Illustration
        *1 Hog Ring Pliers

        except Sport Package:

        Using hog ring pliers, install the separate type front seat cushion cover to the seat cushion pad with 21 new hog rings.

        Note


        • Be careful not to damage the separate type front seat cushion cover.

        • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

      2. A01GJLAE01
        Text in Illustration
        *1 Hog Ring Pliers

        for Sport Package:

        Using hog ring pliers, install the separate type front seat cushion cover to the seat cushion pad with 17 new hog rings.

        Note


        • Be careful not to damage the separate type front seat cushion cover.

        • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

      3. A01GK91

        Install the 2 clips.

  2. INSTALL SEAT CUSHION COVER WITH PAD


    1. Set the front seat cushion cover with pad in place.

    2. for Driver Side:


      1. A01GM6R

        Attach the 10 hooks to install the front seat cushion cover with pad.

      2. A01GLBK

        Attach the fastening tape.

      3. A01GMGS

        Install the 6 clips.

    3. for Front Passenger:

      for Ottoman:


      1. A01GJTN

        Attach the 10 hooks to install the front seat cushion cover with pad.

      2. A01GKB9

        Attach the fastening tape.

      3. A01GNPW

        Install the 6 clips.

    4. A01GM8K

      for Front Passenger:

      except Ottoman:


      1. Attach the 8 hooks to install the front seat cushion cover with pad.

    5. Connect the seat heater connector.

    6. A01GI4T

      Install the 2 clips.

  3. INSTALL FRONT SEAT CUSHION ASSEMBLY LH


    1. A01GMK9E01

      Install the front seat cushion assembly with the 4 bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

    2. Attach the hook.

      Text in Illustration
      *1 Hook
    3. A01GKNH

      Attach the hook.

    4. A01GN9U

      Install the 2 clips.

    5. A01GM57

      Connect the connector and attach the 2 wire harness clamps.

    6. A01GKE3

      Connect the connector and attach the wire harness clamp.

    7. A01GMGV

      Connect the connector and attach the wire harness clamp.

    8. Attach the 4 claws to connect duct of the seat climate control blower LH.

    9. A01GKHN

      Connect the connector.

    10. A01GIX7

      Connect the duct of the seat climate control blower LH with the 3 screws.

    11. A01GMM5

      Attach the 2 claws to install the No. 6 air duct.

  4. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH


    1. A01GKI2E01
      Text in Illustration
      *1 Hook
      *2 Wire Harness Clamp

      Connect the connector and attach the wire harness clamp.

    2. Attach the 2 hooks to install the front seatback board sub-assembly LH.

    3. Install the 2 screws.

  5. INSTALL FRONT SEAT INNER CUSHION SHIELD LH

    A01GLX6

    1. Attach the claw to install the front seat inner cushion shield LH.

    2. Install the 3 screws.

  6. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

    A01GLD3E02
    Text in Illustration
    *1 Protruding Part

    1. Install the front seat inner belt assembly LH with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.

    2. Attach the claw to connect the connector.

    3. Attach the 6 wire harness clamps.

    4. Connect the 2 connectors.

      A01GKFRE01
      Text in Illustration
      *A for Driver Side *B for Front Passenger Side

  7. INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD LH (for Driver Side)


    1. A01GKLD

      Install the front seat inner No. 1 cushion shield LH with the 3 screws.

  8. INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD RH (for Front Passenger Side)


    1. A01GJQ8E01
      Text in Illustration
      *A for Ottoman
      *B except Ottoman

      Install the front seat inner No. 1 cushion shield RH with the 3 screws.

  9. INSTALL FRONT SEAT CUSHION SHIELD LH

    A01GKX7E01

    1. Connect the 2 connectors.

    2. Attach the 2 claws to install the front seat cushion shield LH as indicated by the arrows in the order shown in the illustration.

    3. Install the 3 screws.

    4. A01GHJK

      Attach the rubber band of the front seatback board sub-assembly LH to the front seat adjuster assembly LH.

  10. INSTALL FRONT SEAT ASSEMBLY LH

    Click here

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.