SEAT MEMORY SWITCH (for Rear Side) INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL REAR SEAT MEMORY SWITCH


    1. A01GMHO

      Attach the 4 claws to install the rear seat memory switch.

    2. Connect the connector.

  2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH (w/o Rear Door Sunshade)


    1. for Long Body:


      1. A01GNLN

        Connect the 2 cables to the inside handle.

      2. Connect the connector.

      3. Install the rear door trim board sub-assembly LH with the 3 screws and 13 clips.

    2. for Standard Body:


      1. A01GNLN

        Connect the 2 cables to the inside handle.

      2. Connect the connector.

      3. Install the rear door trim with the 3 screws and 11 clips.

  3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH (w/ Rear Door Sunshade)


    1. for Long Body:


      1. A01GNLN

        Connect the 2 cables to the inside handle.

      2. Connect the connector.

      3. Install the rear door trim board sub-assembly LH with the 3 screws and 14 clips.

    2. for Standard Body:


      1. A01GNLN

        Connect the 2 cables to the inside handle.

      2. Connect the connector.

      3. Install the rear door trim board sub-assembly LH with the 3 screws and 12 clips.

  4. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

    A01GI8G

    1. Install the illumination light with the screw.

    2. Connect the connector.

    3. Attach the 2 clips to install the rear rear power window regulator switch assembly with rear door armrest base panel.

  5. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH


    1. Attach the 3 claws to install the rear door inside handle bezel plug LH.