REAR SEAT ASSEMBLY (for Fixed Seat Type) DISASSEMBLY

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE BENCH TYPE REAR SEAT CUSHION COVER


    1. Remove the 70 hog rings.

    2. Detach the fastening tape to remove the bench type rear seat cushion cover from the bench type rear seat cushion pad.

      A01GMG0E01
      Text in Illustration
      *1 Fastening Tape - -

  2. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY


    1. A01GHL5E01

      Detach the wire harness clamp.

    2. Remove the 2 nuts and rear seat center armrest assembly.

  3. REMOVE REAR NO. 1 SEAT CENTER ARMREST PANEL


    1. A01GHOPE01

      Using moulding remover A, detach the 8 claws and 3 guides to remove the rear No. 1 seat center armrest panel together with the rear seat armrest hole board as indicated by the arrows in the order shown in the illustration.

    2. w/ Module Switch:

      Disconnect the 2 connectors.

    3. A01GHQF

      Remove the 3 screws and rear No. 1 seat center armrest panel from the rear seat armrest hole board.

  4. REMOVE REAR POWER SEAT SWITCH (w/ Rear Power Seat Switch)


    1. A01GLNT

      Remove the 4 screws and rear power seat switch.

  5. REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY

    A01GKKO

    1. Remove the 2 screws and rear seat center armrest cup holder sub-assembly.

  6. REMOVE REAR SEAT HEADREST ASSEMBLY


    1. Remove the rear seat headrest assembly.

      Tech Tips

      Use the same procedure to remove the rear seat headrest assembly on the other side.

  7. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY

    A01GMXO

    1. Remove the 2 bolts and rear center seat headrest assembly.

  8. REMOVE REAR SEAT ARMREST HOLE COVER

    A01GHQB

    1. Detach the 2 clips to remove the rear seat armrest hole cover.

  9. REMOVE REAR SEAT HEADREST SUPPORT

    A01GNYW

    1. Detach the 4 claws to remove the 2 rear seat headrest supports.

      Tech Tips

      Use the same procedure to remove the rear seat headrest support on the other side.

  10. REMOVE REAR SEAT SHOULDER BELT GUIDE LH

    A01GNCA

    1. Remove the 3 screws and rear seat shoulder belt guide LH.

  11. REMOVE REAR SEAT SHOULDER BELT GUIDE RH

    Tech Tips

    Use the same procedures described for the LH side.

  12. REMOVE REAR SEAT CLIMATE CONTROL ECU LH


    1. A01GJYG

      Disconnect the 2 connectors.

    2. Remove the 2 nuts and rear seat climate control ECU LH.

  13. REMOVE REAR SEAT CLIMATE CONTROL ECU RH

    Tech Tips

    Use the same procedures described for the LH side.

  14. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY


    1. Disconnect the connector.

    2. Detach the guide and remove the seat heater control sub-assembly.

      Tech Tips

      Use the same procedure to remove the seat heater control sub-assembly on the other side.

  15. REMOVE REAR SEAT WIRE RH


    1. Disconnect the 2 connectors.

    2. Remove the 14 wire harness clamps labeled A.

    3. Detach the 2 wire harness clamps labeled B to remove the rear seat wire RH.

      A01GJXYE01

  16. REMOVE BENCH TYPE REAR SEATBACK COVER


    1. for LH Side:


      1. Remove the 30 hog rings and bench type rear seatback cover from the bench type rear seat seatback pad.

        A01GNV5E01
        Text in Illustration
        *a Front View *b Rear View

    2. for RH Side:


      1. Remove the 31 hog rings and bench type rear seatback cover from the bench type rear seat seatback pad.

        A01GLI6E01
        Text in Illustration
        *a Front View *b Rear View