DESCRIPTION
With the engine switch on (IG) and the seat memory switch cancel indicator off, when the position control ECU receives a rear door courtesy light switch signal, the following occurs: 1) the slide motor and upper lumbar motor are moved to the rearmost position; 2) the reclining motor* is moved to the foremost position; and 3) the ottoman motor* is moved to the lowermost position.
Tech Tips
*: w/ Ottoman
INSPECTION PROCEDURE
PROCEDURE
CHECK REAR POWER SEAT CONTROL FUNCTION
Operate the rear power seat switch and check that each power seat function operates normally.
| OK |
|---|
| Each function operates normally. |
| NG |
|
GO TO PROBLEM SYMPTOMS TABLE Click here |
| OK |
|
CHECK REAR SEAT MEMORY FUNCTION
Check if the rear seat memory function operates normally.
| OK |
|---|
| Memory function operates normally. |
| NG |
|
GO TO PROBLEM SYMPTOMS TABLE Click here |
| OK |
|
READ VALUE USING INTELLIGENT TESTER (SEAT ECU)
Check the Data List for proper functioning of the seat ECU.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Door OP Link Return Set | Door open linked return operation / Operate or Not Opr | Operate: Rear door open Not Opr: Rear door closed |
- |
| RL-Door Courtesy | Door courtesy switch signal / ON or OFF | ON: Rear LH side door is open OFF: Rear LH side door is closed |
- |
| Ignition Switch | Engine switch status / ON or OFF | ON: Engine switch is ON OFF: Engine switch is OFF |
- |
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Door OP Link Return Set | Door open linked return operation / Operate or Not Opr | Operate: Rear door open Not Opr: Rear door closed |
- |
| RR-Door Courtesy | Door courtesy switch signal / ON or OFF | ON: Rear RH side door is open OFF: Rear RH side door is closed |
- |
| Ignition Switch | Engine switch status / ON or OFF | ON: Engine switch is on (IG) OFF: Engine switch is off |
- |
| OK | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| On tester screen, each item changes between ON and OFF according to above chart. | ||||||||||||
|
| B |
|
REPLACE POSITION CONTROL ECU LH Click here |
| C |
|
REPLACE POSITION CONTROL ECU RH Click here |
| D |
|
REPLACE POSITION CONTROL ECU RH Click here |
| E |
|
GO TO LIGHTING SYSTEM Click here |
| A |
|
REPLACE POSITION CONTROL ECU LH Click here