INSTRUMENT PANEL SAFETY PAD DISASSEMBLY

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE NO. 1 COMBINATION METER BRACKET

    A01GJA0

    1. Remove the No. 1 combination meter bracket.

  2. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

    A01GJ63

    1. Remove the screw.

    2. Detach the claw and remove the No. 1 side defroster nozzle duct.

  3. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

    A01GM2F

    1. Remove the screw.

    2. Detach the claw and remove the No. 2 side defroster nozzle duct.

  4. REMOVE NO. 1 HEATER TO REGISTER DUCT

    A01GJ24

    1. Remove the 3 screws and No. 1 heater to register duct.

  5. REMOVE NO. 3 HEATER TO REGISTER DUCT

    A01GNK8

    1. Remove the 3 screws and No. 3 heater to register duct.

  6. REMOVE DEFROSTER NOZZLE ASSEMBLY

    A01GKTA

    1. Remove the 3 screws and defroster nozzle assembly.

  7. REMOVE NO. 2 HEATER TO REGISTER DUCT

    A01GMHHE01
    Text in Illustration
    *1 Hose

    1. Disconnect the hose from the ion generator sub-assembly.

    2. Remove the 2 screws and No. 2 heater to register duct.

  8. REMOVE ION GENERATOR SUB-ASSEMBLY


    1. A01GI9W

      Disconnect the connector and heater to register duct.

    2. Remove the 2 screws and ion generator sub-assembly.

  9. REMOVE NO. 2 INSTRUMENT PANEL WIRE


    1. A01GKU1

      Detach the connector clamp.

    2. Using a screwdriver release the airbag connector lock.

    3. Using a screwdriver, disconnect the 2 airbag connectors to remove the No. 2 instrument panel wire from the front passenger airbag assembly.

      Note

      When disconnecting airbag connector, take care not to damage the airbag wire harness.

  10. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY

    CAUTION:

    When storing the front passenger airbag assembly, keep the airbag deployment side facing upward.


    1. A01GNEC

      Remove the 2 screws.

    2. A01GNRKE01
      Text in Illustration
      *1 Hook (A)
      *2 Hook (B)

      Detach the 5 hooks (A).

    3. Detach the 5 hooks (B) to remove the front passenger airbag assembly from the instrument panel safety pad assembly as shown in the illustration.

  11. REMOVE NAVIGATION ANTENNA ASSEMBLY

    A01GLJL

    1. Detach the 4 clamps.

    2. Remove the 2 screws and navigation antenna assembly.

  12. REMOVE AUTOMATIC LIGHT CONTROL SENSOR


    1. Disconnect the connector.

    2. A01GLME

      Detach the 2 claws and remove the automatic light control sensor.

  13. REMOVE NO. 2 INSTRUMENT PANEL WIRE

    A01GJEQ

    1. Detach the 5 wire harness clamps and remove the No. 2 instrument panel wire.

  14. REMOVE NO. 1 INSTRUMENT PANEL PIN

    Tech Tips

    Use the same procedure to remove the No. 1 instrument panel pin on the other side.


    1. A01GMHW

      Remove the screw and No. 1 instrument panel pin.

  15. REMOVE NO. 1 METER HOOD RETAINER

    A01GKTN

    1. Remove the 2 screws and 2 No. 1 meter hood retainers.

  16. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

    A01GKQBE01
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Detach the 4 claws and remove the No. 1 instrument panel register assembly.

  17. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    A01GM63E01
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Detach the 4 claws and remove the No. 2 instrument panel register assembly.