CIGARETTE LIGHTER (for Instrument Panel Side) INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL CIGARETTE LIGHTER BEZEL STAY


    1. Attach the 2 claws to install the cigarette lighter bezel stay to the upper console panel sub-assembly.

  2. INSTALL CIGARETTE LIGHTER ASSEMBLY


    1. A01GKLF

      Attach the claw to install the cigarette lighter socket.

    2. Install the cigarette lighter knob and element assembly.

  3. INSTALL CIGARETTE LIGHTER COVER


    1. Attach the 2 claws to install the cigarette lighter cover.

    2. A01GJIF

      Install the wire harness clamp to the connector.

    3. Connect the connector and attach the wire harness clamp.

  4. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Attach the 6 clips to install the upper console panel sub-assembly.

    2. Connect the connector.

  5. INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL


    1. Attach the 5 clips to install the upper instrument cluster finish panel.

  6. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY


    1. Connect each connector and attach each wire harness clamp.

    2. A01GNRT

      Attach the 6 clips to install the upper rear console panel sub-assembly.

    3. Install the 2 screws.

  7. INSTALL NO. 3 BOX PANEL


    1. Attach the 4 claws to install the No. 3 box panel.

  8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01GITL

      Twist the shift lever knob sub-assembly in the direction indicated by the arrow to install it.

    2. A01GJKF

      Pull up the shift lever boot to connect it to the shift lever knob sub-assembly.

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the rear part of the instrument panel finish panel end LH 3 clips.

    2. Attach the front part of the instrument panel finish panel end LH 6 clips to install the instrument panel finish panel end LH.

  10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Tech Tips

    Use the same procedure described for the LH side.