BATTERY CURRENT SENSOR INSTALLATION


  1. INSTALL GROUND WIRE (BATTERY CURRENT SENSOR)


    1. A01GKL2E01
      Text in Illustration
      *1 Bolt A
      *2 Bolt B

      for LHD:


      1. Install the ground wire (battery current sensor) with the 2 bolts A.

        Torque:
        11.5 N*m  { 117 kgf*cm, 8 ft.*lbf }

      2. Install the bolt B to connect the ground wire harness to the ground wire (battery current sensor).

        Torque:
        10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      3. Connect the connector.

    2. A01GIE6E01
      Text in Illustration
      *1 Bolt A
      *2 Bolt B

      for RHD:


      1. Install the ground wire (battery current sensor) with the 2 bolts A.

        Torque:
        11.5 N*m  { 117 kgf*cm, 8 ft.*lbf }

      2. Install the bolt B to connect the ground wire harness to the ground wire (battery current sensor).

        Torque:
        10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      3. Connect the connector.

  2. INSTALL FRONT FENDER UPPER PROTECTOR RH (for LHD)

    Tech Tips

    Use the same procedure described for the LH side.

  3. REMOVE FRONT FENDER UPPER PROTECTOR LH (for RHD)


    1. A01GIFT

      Attach the clips to install the fender protector upper LH.

  4. INSTALL ENGINE ROOM SIDE COVER RH (for LHD)


    1. Install the engine room side cover RH with the 5 clips.

  5. REMOVE ENGINE ROOM SIDE COVER LH (for RHD)


    1. Install the engine room side cover LH with the 5 clips.

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. INSTALL COWL TOP VENTILATOR LOUVER


    1. A01GM4S

      for LHD:

      Install the 6 clips and cowl top ventilator louver RH.

      Note

      If the cowl top ventilator louver RH is not properly installed, water may leak into the engine room and cause malfunctions. Therefore, make sure the cowl top ventilator louver RH is installed properly.

    2. A01GI9P

      for RHD:

      Install the 6 clips and cowl top ventilator louver LH.

      Note

      If the cowl top ventilator louver LH is not properly installed, water may leak into the engine room and cause malfunctions. Therefore, make sure the cowl top ventilator louver LH is installed properly.