LOW PITCHED HORN INSTALLATION


  1. INSTALL LOW PITCHED HORN ASSEMBLY


    1. for Type A:


      1. Connect the horn connector.

      2. Install the horn with the bolt.

        Torque:
        19 N*m  { 194 kgf*cm, 14 ft.*lbf }

    2. for Type B:


      1. Connect the horn connector.

      2. Install the horn with the bolt.

        Torque:
        19 N*m  { 194 kgf*cm, 14 ft.*lbf }

  2. INSTALL COOL AIR INTAKE DUCT SEAL


    1. Install the cool air intake duct seal with the 4 clips.

  3. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY


    1. A01GIR0E02

      Align the holes with the connection areas labeled A, and attach the No. 1 air cleaner inlet.

    2. Install the No. 1 air cleaner inlet with the 2 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

  4. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 5 clips.

  5. INSTALL ENGINE ROOM SIDE COVER RH


    1. Install the engine room side cover RH with the 5 clips.