CLEARANCE WARNING BUZZER (for Rear Side) INSTALLATION


  1. INSTALL NO. 2 CLEARANCE WARNING BUZZER


    1. Attach the clamp to install the No. 2 clearance warning buzzer.

    2. Connect the connector.

  2. INSTALL REAR SEAT OUTER BELT ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL COWL TOP VENTILATOR LOUVER RH


    1. A01GM4S

      Install the 6 clips and cowl top ventilator louver RH.

      Note

      If the cowl top ventilator louver RH is not properly installed, water may leak into the engine room and cause malfunctions. Therefore, make sure the cowl top ventilator louver RH is installed properly.

  5. CHECK SRS WARNING LIGHT

    Click here