ELECTRIC POWER CONTROL SYSTEM PRECAUTION


  1. NOTICE FOR INITIALIZATION

    Note

    When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.

    System See procedure
    Navigation System

    Click here

    Parking Assist Monitor System
    Intelligent Parking Assist System
    Rear Door Sunshade System
    Power Trunk Lid System

  2. PRECAUTION FOR ELECTRIC POWER CONTROL SYSTEM


    1. If a load control linked system does not operate due to a problem in the electric power control system, use the intelligent tester to check for electric power control system DTCs, and write them down. Or, check the Data List's load control history and write down the information.

  3. PRECAUTIONS WHEN USING INTELLIGENT TESTER


    1. When using the intelligent tester with the engine switch on (IG):

      After all DTCs are cleared, check if the trouble occurs again 6 seconds after the engine switch is turned on (IG).