PARKING ASSIST MONITOR SYSTEM, Diagnostic DTC:C1649

DTC Code DTC Name
C1649 Lost Communication with VGRS ECU

DESCRIPTION

This DTC is stored when the multi-media module receiver assembly self-diagnosis determines that the connection with the steering control ECU of the variable gear ratio steering system (via CAN communication) is inoperative.

DTC Code DTC Detection Condition Trouble Area
C1649 Steering Control ECU malfunction Variable gear ratio steering system

INSPECTION PROCEDURE

Note


  • When "System initializing" is displayed on the accessory meter assembly after disconnecting the cable from the negative (-) battery terminal, correct the steering angle neutral point Click here.

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed Click here.

PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTCs Click here.

    2. Check the DTCs Click here.

      Result
      Result Proceed to
      No DTC is output A
      DTC C1649 is output B

    B

    GO TO VARIABLE GEAR RATIO STEERING SYSTEM Click here

    A

    USE SIMULATION METHOD TO CHECK Click here