PARKING ASSIST MONITOR SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC (USING GTS)


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

    5. Check for DTCs Click here.

      Note

      The multi-media module receiver assembly outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the multi-media module receiver assembly are output, refer to Diagnostic Trouble Code Chart for the relevant system.

      System Proceed to
      Audio and visual system

      Click here

      Navigation system

      Click here

      Rear seat entertainment system

      Click here

  2. CLEAR DTC (USING GTS)


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

    5. Clear the DTCs.

  3. CHECK DTC (USING DIAGNOSTIC MODE)


  4. CLEAR DTC (USING DIAGNOSTIC MODE)