NAVIGATION SYSTEM Display does not Dim when Light Control Switch is Turned ON

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK IMAGE QUALITY SETTING


    1. A01GM2AE01
      Text in Illustration
      *a Example

      Display the "Display" screen.

    2. Turn the light control switch to the tail or head position.

    3. Check if "Day Mode" setting on the display adjustment screen is on.

      Result
      Result Proceed to
      "Day Mode" setting is on A
      "Day Mode" setting is off B

    B

    CHECK VEHICLE SIGNAL (OPERATION CHECK) Click here

    A

    TURN "Day Mode" SETTING OFF

  2. CHECK VEHICLE SIGNAL (OPERATION CHECK)


    1. A01GKQU

      Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check Click here.

    2. Check that the display changes between ON and OFF according to the light control switch operation.

      OK
      Light Control Switch Display
      Tail or head ON
      Off OFF

      Tech Tips

      The display is updated once per second. It is normal for the display to lag behind the actual switch operation.


    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    OK

    REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here