FRONT DOOR SPEAKER INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

    Note

    Do not touch the cone of the speaker.


    1. Connect the connector.

      A01GJT3E01
      Text in Illustration
      *A for Standard *B for 19 Speakers

    2. Temporarily install the speaker by attaching the claw of the speaker to the door panel.

    3. Install the front No. 1 speaker assembly with the 4 screws.

      Tech Tips

      Tighten the screws in the order shown in the illustration.

  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. Connect the connector.

    2. A01GNLN

      Connect the 2 cables to the inside handle.

    3. Attach the 13 clips to install the front door trim board sub-assembly LH.

    4. Install the 3 screws.

  3. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    1. Connect the connector.

    2. A01GHPZ

      Attach the 2 claws to install the power window regulator master switch assembly with front door armrest base panel.

  4. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH


    1. Attach the 3 claws to install the front door inside handle bezel plug LH.