AUDIO AND VISUAL SYSTEM Rear Seat Control Switch Power Source Circuit

DESCRIPTION

This circuit provides power to the rear power seat switch (audio switch).

WIRING DIAGRAM

A01GN03E01

INSPECTION PROCEDURE

Note

Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE


  1. CHECK HARNESS AND CONNECTOR (REAR POWER SEAT SWITCH [AUDIO SWITCH] - BATTERY AND BODY GROUND)


    1. A01GM6IE08
      Text in Illustration
      *A for 4-Passenger with Ottoman
      *B except 4-Passenger with Ottoman
      *a

      Front view of wire harness connector

      (to Rear Power Seat Switch [Audio Switch])

      Disconnect the rear power seat switch (audio switch) connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for 4-Passenger with Ottoman
      Tester Connection Condition Specified Condition
      S15-1 (E) - Body ground Always Below 1 Ω
      except 4-Passenger with Ottoman
      Tester Connection Condition Specified Condition
      r2-9 (E) - Body ground Always Below 1 Ω

    3. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      for 4-Passenger with Ottoman
      Tester Connection Condition Specified Condition
      S15-8 (B) - Body ground Always 11 to 14 V
      except 4-Passenger with Ottoman
      Tester Connection Condition Specified Condition
      r2-14 (B) - Body ground Always 11 to 14 V

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here