METER / GAUGE SYSTEM PRECAUTION


  1. WARNING NOTIFICATION FUNCTION

    Note


    • Before performing inspections or repairs which may cause warning messages or DTCs to occur, such as a simulation test or road test, it is necessary to activate warning notification restraint mode so that the G-BOOK center does not recognize the warnings as real ones.

    • Warning notification restraint mode can be entered by using the GTS or operating the remote touch.

    Tech Tips

    The warning notification function sends a warning ON signal, received from the combination meter assembly via CAN communication, to the G-BOOK center using the G-BOOK device if a warning is displayed due to a vehicle malfunction.


    1. Warning notification restraint mode

      Tech Tips


      • Performing the following procedure will select warning notification restraint mode.

      • To cancel warning notification restraint mode, turn the engine switch off and on (IG) to display the service mode screen and select the "Cancel" button on the screen.


      1. Warning notification restraint mode (Using the GTS)


        1. Turn the engine switch off.

        2. Connect the GTS to the DLC3.

        3. Start the engine.

        4. Enter the following menus: Powertrain / Engine and ECT / DTC.

      2. Warning notification restraint mode (Operating the remote touch)


        1. Enter diagnostic mode of the navigation system Click here.