ELECTRICAL KEY OSCILLATOR (for Outside Luggage Compartment) INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL ELECTRICAL KEY ANTENNA


    1. Install the electrical antenna with the 2 nuts.

    2. Connect the connector.

  2. INSTALL REAR BUMPER ENERGY ABSORBER


    1. Install the rear bumper energy absorber.

  3. INSTALL REAR BUMPER COVER


    1. Connect the No. 3 floor wire connector.

    2. Attach the 14 claws and 4 guides to install the rear bumper cover.

    3. Install the 2 screws.

    4. Install the 6 clips.

    5. Install the 2 screws.

    6. A01GLHM

      Install the rear bumper seal bracket and screw.

      Tech Tips

      Use the same procedure for both screws and rear bumper seal brackets.

  4. INSTALL REAR BUMPER PLATE LH


    1. Attach the 3 claws to install the upper rear bumper cover LH.

  5. INSTALL REAR BUMPER PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.