ELECTRICAL KEY OSCILLATOR (for Rear Floor) INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL INDOOR ELECTRICAL KEY OSCILLATOR (for 4-Passenger with Ottoman)


    1. Install the indoor electrical key oscillator with the 2 bolts.

    2. Connect the connector.

    3. Install the bracket with the 4 screws.

    4. Return the No. 3 room partition pad to its original position.

    5. Attach the clip.

  2. INSTALL REAR SEAT CONSOLE PANEL ASSEMBLY (for 4-Passenger with Ottoman)


    1. Connect the connector.

    2. Attach the 6 clips to install the rear seat console panel assembly.

  3. INSTALL REAR SEAT CONSOLE ARMREST GARNISH RH (for 4-Passenger with Ottoman)

    Tech Tips

    Use the same procedures described for the LH side.

  4. INSTALL REAR SEAT CONSOLE ARMREST GARNISH LH (for 4-Passenger with Ottoman)


    1. A01GK9Q

      While lowering the rear seat console armrest garnish LH, attach the 3 claws and 2 clips to install it.

  5. INSTALL INDOOR ELECTRICAL KEY OSCILLATOR (for Power Seat, for 5-Passenger with Ottoman)


    1. Install the indoor electrical key oscillator with the 2 bolts.

    2. Connect the connector.

    3. Return the No. 3 room partition pad to its original position.

    4. Attach the clip.

  6. INSTALL REAR CENTER SEAT CUSHION ASSEMBLY (for Power Seat, for 5-Passenger with Ottoman)

    A01GJWX

    1. Attach the rear hook of the center seat cushion assembly to the center seatback frame sub-assembly.

      Note

      Be careful not to damage the vehicle body.

    2. Attach the front hook of the rear center seat cushion assembly to the vehicle body.

  7. INSTALL INDOOR ELECTRICAL KEY OSCILLATOR (for Fixed Seat Type)


    1. Install the indoor electrical key oscillator with the 2 bolts.

    2. Connect the connector.

    3. Return the No. 3 room partition pad to its original position.

    4. Attach the clip.

  8. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)

    Note

    Be careful not to damage the vehicle body.


    1. Set the bench type rear seat cushion assembly in place.

    2. A01GLG3E01
      Text in Illustration
      *A w/ Seat Heater System

      w/ Seat Heater System:

      Connect the 2 connectors.

    3. Attach the 2 rear hooks of the bench type rear seat cushion assembly to the bench type rear seatback assembly.

    4. Attach the 3 front hooks to install the bench type rear seat cushion assembly.

    5. Confirm that the bench type rear seat cushion assembly is firmly installed.

      Note

      When installing the bench type rear seat cushion assembly, make sure the seat belt buckle is not under the bench type rear seat cushion assembly.