DATA LIST
Tech Tips
Using the intelligent tester to read the Data List allows values or status of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn ON the intelligent tester.
Enter the following menus.
Select: Body / (desired system) / Data List.
According to the display on intelligent tester, read the "Data List".
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| D Door Courtesy SW | Driver side door courtesy switch signal / ON or OFF | ON: Driver side door is open OFF: Driver side door is closed |
- |
| P Door Courtesy SW | Passenger side door courtesy switch signal / ON or OFF | ON: Passenger side door is open OFF: Passenger side door is closed |
- |
| RL Door Courtesy SW | Rear door courtesy switch LH signal / ON or OFF | ON: Rear door LH is open OFF: Rear door LH is closed |
- |
| RR Door Courtesy SW | Rear door courtesy switch RH signal / ON or OFF | ON: Rear door RH is open OFF: Rear door RH is closed |
- |
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Lock position switch | Driver side door lock position switch signal / ON or OFF | ON: Driver side door lock is unlocked OFF: Driver side door lock is locked |
- |
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Lock position switch | Passenger side door lock position switch signal / ON or OFF | ON: Passenger side door is unlocked OFF: Passenger side door is locked |
- |
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Lock position switch | Rear door LH lock position switch signal / ON or OFF | ON: Rear door LH is unlocked OFF: Rear door LH is locked |
- |
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Lock position switch | Rear door RH lock position switch signal / ON or OFF | ON: Rear door RH is unlocked OFF: Rear door RH is locked |
- |
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Courtesy SW | Luggage compartment door courtesy switch signal / ON or OFF | ON: Luggage compartment door is open OFF: Luggage compartment door is closed |
- |
ACTIVE TEST
Tech Tips
Using the intelligent tester to perform Active Test allows relays, VSVs, actuators and parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Test early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Test.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn ON the intelligent tester.
Enter the following menus.
Select: Body / (desired system) / Active Test.
According to the display on intelligent tester, perform the "Active Test".
| Tester Display | Test Part | Control Range |
|---|---|---|
| Hazard | Turn signal flasher relay | ON or OFF |
| Tester Display | Test Part | Control Range |
|---|---|---|
| Door lock | Front door lock motor LH | OFF, LOCK or UNLOCK |
| Tester Display | Test Part | Control Range |
|---|---|---|
| Door lock | Front lock motor RH | OFF, LOCK or UNLOCK |
| Tester Display | Test Part | Control Range |
|---|---|---|
| Door lock | Rear door lock motor LH | OFF, LOCK or UNLOCK |
| Tester Display | Test Part | Control Range |
|---|---|---|
| Door lock | Rear door lock motor RH | OFF, LOCK or UNLOCK |