WASHER LEVEL WARNING SWITCH INSTALLATION


  1. INSTALL LEVEL WARNING SWITCH ASSEMBLY


    1. A01GNZD

      Install the level warning switch assembly.

    2. Connect the connector.

    3. A01GJBM

      Connect the washer hose to the windshield wiper motor and pump assembly.

  2. FILL WINDSHIELD WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID


    1. A01GJBM

      Connect the washer hose to the windshield washer motor and pump, and fill the washer jar with washer fluid.

  3. INSTALL FRONT FENDER LINER LH


    1. Install the front fender liner LH with the 15 screws and 6 clips.

  4. INSTALL FRONT FENDER MAIN SEAL LH


    1. A01GNTSE01

      Push in the clip labeled A in the illustration in the upward direction of the vehicle and install the front fender main seal LH with the 3 clips.

  5. INSTALL FRONT FENDER WHEEL OPENING MOULDING LH


    1. Attach the clip to install the moulding.

    2. Install the 5 screws.

  6. INSTALL FRONT WHEEL LH

    Torque:
    119 to 161 N*m  { 1213 to 1642 kgf*cm, 88 to 119 ft.*lbf }