WASHER NOZZLE ON-VEHICLE INSPECTION


  1. REMOVE WASHER NOZZLE SUB-ASSEMBLY


    1. With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched areas shown in the illustration.

      Standard
      Washer fluid hits the windshield in the areas shown in the illustration.
      A01GIRQE01
      Standard measurement
      Area Specified Condition
      A 325.0 mm (12.795 in.)
      B 191.3 mm (7.531 in.)
      C 283.6 mm (11.165 in.)
      D 121.5 mm (4.783 in.)

      If the result is not as specified, replace the washer nozzle.