STOP LIGHT SWITCH REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    A01GNJE

    1. Remove the 2 screws.

    2. Detach the 2 claws as shown in the illustration and remove the No. 1 instrument panel under cover sub-assembly.

    3. Detach the 2 claws and disconnect the DLC3.

    4. Disconnect each connector and each wire harness clamp.

  2. REMOVE STOP LIGHT SWITCH ASSEMBLY

    A01GKGGE02
    Text in Illustration
    *1 Stop Light Switch Assembly

    1. Disconnect the connector.

    2. Loosen the lock nut, and then remove the stop light switch assembly.