FOOTWELL LIGHT (for Rear) INSTALLATION

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.


  1. INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH


    1. Install the No. 1 interior illumination light assembly LH with the screw.

    2. Attach the clamp.

  2. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH


    1. A01GKI2E01
      Text in Illustration
      *1 Hook
      *2 Wire Harness Clamp

      Connect the connector and attach the wire harness clamp.

    2. Attach the 2 hooks to install the front seatback board sub-assembly LH.

    3. Install the 2 screws.

  3. INSTALL FRONT SEAT INNER CUSHION SHIELD LH

    A01GLX6

    1. Attach the claw to install the front seat inner cushion shield LH.

    2. Install the 3 screws.

  4. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

    A01GLD3E02
    Text in Illustration
    *1 Protruding Part

    1. Install the front seat inner belt assembly LH with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.

    2. Attach the claw to connect the connector.

    3. Attach the 6 wire harness clamps.

    4. Connect the 2 connectors.

      A01GKFRE01
      Text in Illustration
      *A for Driver Side *B for Front Passenger Side

  5. INSTALL FRONT SEAT CUSHION SHIELD LH

    A01GKX7E01

    1. Connect the 2 connectors.

    2. Attach the 2 claws to install the front seat cushion shield LH as indicated by the arrows in the order shown in the illustration.

    3. Install the 3 screws.

    4. A01GHJK

      Attach the rubber band of the front seatback board sub-assembly LH to the front seat adjuster assembly LH.