CONSOLE BOX LIGHT (for Disc Type) INSTALLATION


  1. INSTALL CONSOLE BOX ILLUMINATION LIGHT ASSEMBLY


    1. Attach the 2 claws to install the console box illumination light assembly.

    2. Connect the connector.

  2. INSTALL DISC PLAYER ASSEMBLY


    1. Connect each connector.

    2. Move the disc player with bracket upward to attach the 2 hooks.

    3. Install the disc player with bracket with the 4 bolts.

  3. INSTALL REAR CONSOLE END PANEL


    1. Connect each connector and attach the wire harness clamp.

    2. Attach the 2 hooks and 2 clips to install the rear console end panel.

  4. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY


    1. Attach the 2 clips to install the rear console end panel sub-assembly.

    2. Install the 2 screws.

  5. INSTALL REAR NO. 1 CONSOLE END PANEL GARNISH


    1. Attach the 3 guides and 3 clips to install the rear No. 1 console end panel garnish.

  6. INSTALL REAR NO. 2 CONSOLE END PANEL GARNISH


    1. Attach the 3 guides and 3 clips to install the rear No. 2 console end panel garnish.

  7. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH


    1. Attach the 4 clips to install the upper No. 1 console panel garnish.