FOOTWELL LIGHT (for Rear) REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT SEAT CUSHION SHIELD LH


    1. A01GHJK

      Release the rubber bands of the seatback board sub-assembly LH from the front seat adjuster assembly LH.

    2. A01GLS0E01

      Remove the 3 screws.

    3. Detach the 2 claws to remove the front seat cushion shield LH as indicated by the arrows in the order shown in the illustration.

    4. Disconnect the 2 connectors.

  2. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH


    1. Disconnect the 2 connectors.

    2. Detach the 6 wire harness clamps.

    3. Detach the claw and disconnect the connector.

      A01GKFRE01
      Text in Illustration
      *A for Driver Side *B for Front Passenger Side
    4. A01GLJT

      Remove the nut and front seat inner belt assembly LH.

  3. REMOVE FRONT SEAT INNER CUSHION SHIELD LH

    A01GLX6

    1. Remove the 3 screws.

    2. Detach the claw to remove the front seat inner cushion shield LH.

  4. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH


    1. A01GI1EE01
      Text in Illustration
      *1 Hook
      *2 Wire Harness Clamp

      Remove the 2 screws.

    2. Detach the 2 hooks.

    3. Detach the wire harness clamp and disconnect the connector to remove the front seatback board sub-assembly LH.

  5. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH

    A01GNGJ

    1. Detach the clamp.

    2. Remove the screw and No. 1 interior illumination light assembly LH.