VANITY LIGHT (for Front) INSPECTION

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.


  1. INSPECT VISOR ASSEMBLY LH

    A01GM7YE07
    Text in Illustration
    *a

    Component without harness connected

    (Visor Assembly LH)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 (SW) - 1 (GND) Visor raised 10 kΩ or higher
      2 (SW) - 1 (GND) Visor lowered and mirror cover closed 10 kΩ or higher
      2 (SW) - 1 (GND) Visor lowered and mirror cover open Below 1 Ω

      If the result is not as specified, replace the visor assembly LH.